Matrix Appliances MHN100FR Manuel télécharger pdf (Page 11)

How to install the hob:

Overall dimensions of the hob:

Width: 580 mm Depth: 510 mm

Worktop cut-out dimensions:

Width: 560 mm Depth: 490 mm

1. Make the required hole in the worktop. Before doing this, you must check the instructions supplied with any cooker hood

to ensure that you will have the required clearance. The cut-out (Fig.5) shows a 60mm gap from the wall to the cut-out edge.

The distance from the hob, when ﬁtted, to the back wall is 50mm.

If a splashback/worktop upstand is to be ﬁtted, take this into account when cutting the hole. The minimum distance that the

hob should be positioned away from the rear wall or splashback is 50mm.

2. Fix the foam seal underneath the appliance by following the outline of the worktop upon which the hob will rest

This ensures an airtight seal with the worktop. Do not use silicone type sealant.

3. Secure the hob to the worktop using the clips provided, as shown in ﬁg 4. Do not use power tools to secure the clips.

Fig.3

Fig.4

Fig.5

ventilation

space

510

580/770

490

560 / 750

580

560

50mm

25mm

500 x 10

50mm

6mm

400mm

600mm

600mm minimum

(650mm recommended)

Fig.6

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Pas de commentaire

Matrix Appliances MHN100FR Manuel Page 11